This is my Molle II Patrol Pack (MARPAT) in the wild with the Elecraft KH1 transceiver shack in a box. Shot with the Fujifilm X100V and post-processed on my iPhone 13 Pro Max with Snapseed.
I bought a milsurp Molle II Patrol Pack a couple-three months ago. It is part of my (apparently) never-ending search for the perfect pack. These are long out of service, relatively rare, and in demand. They are also nearly the perfect size for a daypack.
My seller scrounged up a stiffener and pad for my pack and I have them installed. The stiffener helps keep the shape of the bag. It works well enough, although I might have to trim it up just a bit as it seems to be about a half-inch too tall.
It is big enough to hold my necessaries for hiking with The Girl. I have enough water for us both for a morning or afternoon hike, and even room for a small radio. I have been carrying a camera and small water bottle in a small Domke bag slung cross-body and over the pack. That does not put too much pressure on my neck (a personal peeve).
I like it so far. I am still setting it up and would like to carry a water bottle on the outside, but the Maxpedition bottle bag I have does not hang well from the PALS webbing. So, I need another solution.
I paused to make this image on a small summit just off our regular path near Spooner Summit. I had paused to breathe a minute, take some water, and water The Girl. She also posed for me while we were on break.
The view of the Sierra Nevada from El Dorado National Forest. Shot with iPhone 13 Pro Max.
I worked at Wilson Creek and South Fork Silver Creek yesterday. Of course, Sera, AKA The Girl was with me. We were walking last year’s work and noting areas that need some attention. We also walked an area slated for work this year.
The Wilson Creek meadow is lovely. There were a few mosquitoes, but not bad. The weather was also lovely. It was a good day to be outdoors.
The Girl had a blast, running all over the meadow, jumping in the water, rolling in the grass and mud, and then repeating.
Older Son turning wrenches. Shot with Nikon F2AS and Nikkor 35mm f/2D on Ilford XP2.
A few weeks ago we had a nice day and the motivation to replace the valve cover gasket on Older Son’s vehicle. I think I wrote about all of that before.
But, I made a few images with the Nikon F2AS that came to live with me and a Nikkor 35mm f/2D lens. The camera is completely mechanical. It does have an internal meter, but a battery is not required to run the camera; only the meter.
I shot the image with the 35mm probably at f/4 or so. The film stock is Ilford XP2, which is a lovely C41 process (standard color chemistry) that renders in black and white. The scan was done by the processor and seems overly contrasty to me. I’d like to redo the scan to see if I can get more tones from the negative.
Although having film processed locally is faster and more convenient, a professional laboratory should produce better results. I am planning to send film to a couple of labs, particularly color chemistry films, to see if they produce better scans. Black and white film (traditional processing) I will likely do myself. I have a film changing tent (covers the hands) that I can use to load a tank. The processing is done in the light because the tank is light tight.
I have a film scanner but could also use a digital camera to photograph frames with a light table and macro lens.
There are more experiments to do.
The day was a good day. The valve cover no longer leaks oil.
Shot with the Nikon F2AS and a Voigtlander 90mm f/2.8 lens on Ilford XP2.
This is another frame from a cemetery walk a month ago. The film sat in the camera for a while until I finished the roll. Then it sat in the camera bag for a week until I had time to get it to the processor.
It will be interesting to scan some frames for myself using either a digital camera of the film scanner I have at home.
Although it was cold, the sun was shining. The Girl wanted out to chase squirrels, but dog are expressly forbidden. That is most likely because too many people do not police up after their dogs. So, those who do pay the penalty.
Although the sun was warm, the wind had a bite to it. Older Son and I finished before too long because of the cold.
This is a favorite Italian joint here in Ozark, Missouri. Shot with Bronica S2A and the Nikkor 75mm f/2.8 at about f/8 with Kodak Gold 200 film.
I shot this image a couple of weeks ago using Kodak Gold 200 film. It is from the first roll of color film through the new-to-me Bronica S2A medium format camera. The Bronica is my first square format camera and is a beast of a brick! I think it weighs in at about four pounds with the standard Nikkor 75mm f/2.8 lens and a film back.
The firing of the shutter is a thing that has to be experienced to be appreciated! There is a lot of movement inside the camera body with the moving of the mirror and focal plane shutter. It is also loud. However, although I have read of motion blur complaints, I am not quite sure that I believe them. A tripod will be required for slow shutter speeds.
Kodak Gold 200 works well in bright sun. I like the color rendition. I think I will shoot some more of it and send it for processing at a place that can produce higher resolution scans.
A new favorite breakfast restaurant here in Springfield, MO. Capture with Fujifilm X100V and Reggie’s Portra 400 film simulation, SOOC.
A week ago DiL took me to breakfast at the subject venue. They produce solid American Diner food and the breakfast was good. I had an appointment to drop off the 4Runner for maintenance and the shop is only a couple of miles from Scramblers. So I decided to treat myself to breakfast.
They were not busy at 0700h this morning so I was seated quickly. Coffee was at hand shortly thereafter. I made my order and working on an image to post to Vero. My food appeared before I finished my edits.
Once again, the food was good and priced reasonably. I enjoyed it, put a little bit in a napkin to pay the dog tax, and then finished my edits and posted my image to Vero while finishing my coffee.
Then it was off the Christian Brothers Auto to have the 4Runner serviced. There is a long list of scheduled maintenance to do. I was on the fence about keeping my 2013 Fifth Gen 4Runner or trading for a new one. My rig has 200,000 miles on it, but has no known mechanical issues.
I have decided to try for another 100,000 miles. So, I am going to clean up a few minor issues and keep running the mileage clock.
My pack and radio kit for the K-11225 Blue Slip Tower Site activation. Shot with iPhone 13 Pro Max.
When I went to bed Thursday night, I was pretty sure that I wanted to get out and activate a park. I had my eye on Blue Slip Tower Site State Conservation Area for a week or so. It was unactivated and I did not have any first activations to my credit.
After dealing with my morning duties and getting some food at Rosie Jo’s Diner, I fed The Girl, gathered up my radio bag and KX2 shack-in-a-bag, and headed out to the rig. I put the location of the park into my iPhone and we headed out. Too late I realized that I had not brought a camera with me. But, there is always the camera in my iPhone.
The drive out took about an hour. I had posted my activation so hunters would know I would be there. I was not sure if I would have mobile phone service, but should not have been. There are two cell towers on the hilltop as well as the fire watch tower.
When I arrived at the site, the gate was closed but not locked. It was posted, though, that unauthorized vehicles were not allowed on the access road. There was not a no trespassing sign, however. There should not be — it is public land and a conservation area open to hunting.
The Girl on Overwatch. Shot with iPhone 13 Pro Max.I got The Girl out the rig, put my radio and antenna bags into my pack, and grabbed the SOTAbeams 10m Travel Mast from the back of the rig. It was a bit of a struggle to keep her out of the mud, but she complied.
The hump up the access road to the top of the hill was neither long nor too taxing. It was a nice climb through the woodlot with a lot of birds calling just ahead of us. The Girl kept an eye open for the dreaded bushytail, not wanting to let one sneak up on us. She also kept an eye on me, I noticed. I had to call her back in a couple of times because she tends to range out a 75 meters if I do not keep her reeled in.
The fire watch tower at Blue Slip Tower Site. Shot with iPhone 13 Pro Max.As mentioned above, I needed not worry about mobile phone signal because there are two cell towers on top of the hill. I had a good signal. I was tempted to climb the fire watch tower and operate near the top, but I worried that Sera might not pay attention and fall. So, I elected to sit on one of the footings and use the structure to support my antenna.
Although the wire is not visible, the SOTAbeams 10m Travel Mast that supports it certainly is. I affixed the mast to the tower leg. The antenna is an end-fed random wire about 28ft long. Shot with iPhone 13 Pro Max.It did not take long to deploy the antenna. I considered using the end-fed half-wave for this activation, but decided that the slightly shorter end-fed random wire fit the setting better. I used a cobrahead (binding post adapter) affixed directly to the Electaft KX2 and threw the counterpoise wire out in the grass.
I fastened my kneeboard to my leg and set the rig on it. I grabbed a spare battery (lesson learned) and set it behind the little rig. The Girl settled into a spot in the grass to keep overwatch. I tuned the radio to the 30m band and selected 10.111MHz as my operating frequency. After listening a couple of minutes, I sent QRL? (is the frequency in use) and listened. I sent it again and listened again.
Nothing heard, so I set the radio to call CQ POTA DE AG7TX K and repeat while I opened the web browser on my iPhone and posted my spot. After a few cycles I checked the Reverse Beacon Network (again on my iPhone) and noticed that one of the spotting stations heard me. I knew I was getting out.
About that time the first call came in and I began working stations. The 30m band actually produced quite a few contacts, especially given I was running QRP (5 watts; low power). I worked stations to the east, mostly.
In the middle of my operation, a rancher drove up in his truck. “Did you see a cow come up here?” he called.
“Nope, nothing here.” I pointed out he had something hung under the passenger side of his rig so he got out to clear it. I sent AS AS (stand by) and chatted for just a few seconds before wishing him luck finding his missing cow. I then returned my attention to the radio as he drove off down the hill.
My Elecraft KX2 deployed on my kneeboard and ready to rock and roll. Shot with iPhone 13 Pro Max.When that fishing hole was fished out, I moved to the 20m band and repeated the process. Twenty meters provided a lot more action and I worked a pretty good pileup until the calls thinned out. By that time I had about 30 calls in my log, so my activation was made. The skies were quite gray and I had missed some rain by only a few minutes. I really thought it might rain again.
I elected to move up to the 17m band, found an open frequency, and called a few times. Seventeen meters was quite a bit more noisy that the previous two bands. I figured I might take a call or two and then call it a day. I was starting to get cold and was ready for some food. I worked a couple of stations and then called QRT and shut off the radio.
In the end, I collected about 30 contacts and one DX station in Italy. It was a good day.
It did not take long to recover the station. The Girl and I enjoyed the walk back down the hill. The gate was open, so I left it. I was taught to leave gates in the condition I found them.
As I loaded The Girl and my kit into my rig, the rancher drove up.
“Did you find your cow?”
“Yes! She was stuck between two trees and calving! I managed to get the calf out, but now I need to get a chainsaw to free the cow.”
“Good luck!” I called and watched him hurry off to his place to get the tools needed to free his cow. It reminded me of the so many times I worked around the farm when I was a young man. Those are good memories. It was good work.
On the way home I stopped a Hucklebuck BBQ for a bite. The place is billed as the best BBQ around. They were not kidding — the brisket is the best I have had since I left Texas. I left warm and full and even brought the dog tax to The Girl.
I do not have a long list of lessons learned from this expedition. There were things I might have done differently, but they were not big changes. This one was pretty routine.
This was my KX2 station setup at K-10387, Joe Crighton State Recreation Area. Shot with iPhone 13 Pro Max.
I was up early Wednesday morning to see Older Son off to work. He leaves the house about 0630h and I like to get up and spend an hour or so with him as he readies himself for the day. I have a cup of coffee and chat with him and DiL. She also gets up to spend time with him before he heads off and her day starts.
DiL runs the Springfield Barnes & Noble, so her hours are variable. She sometimes leaves just after Older Son. And sometimes she leaves much later. That is the nature of retail work. But she always gets up with him and I respect that.
After he leaves I sometimes return to nap for a few more minutes. It all depends on how well I slept the night before. As I age, I find that sometimes I do not sleep as well. I am sure my experience is not unusual.
Fortunately, my work permits me a lot of flexibility. I like that and take advantage of it.
But, Wednesday morning I warmed my cup of coffee and sat at the desk. A hydraulic model I am working on completed late last night and I wanted to review the work and decide what to do next. In reviewing the results, I had good ideas for what needed to be done. So, I got started on it. I worked until my brain rebelled, so I decided it was time to take a break.
DiL had returned to bed, so I got a shower and dressed for my day. That brought Sera out to see what I was doing. I decided I needed a waffle in my face and Sera could tell I was moving with purpose.
So, she went with me. We drove up to the Waffle House and I had sausage and eggs and a pecan waffle. I saved some of my sausage and my hash browns for Sera. She was very excited when I returned to the rig with a treat. 🙂
We drove home and I returned to my hydraulic model. I finished the amendments about noon and started a run. Once the preprocessor finished developing the solution grid and the computational engine started, I knew it would be a few hours before I had any results.
That meant — I had a few hours to play. The weather was gorgeous so I decided to get out and activate a new park. Sera and I headed out, I bought a sandwich and a bottle of water, and we arrived at the park in a few minutes. I got lunch and Sera out and we shared my sandwich and chips. She sniffed around while I deployed an antenna.
It took four or five tries to get a line over a branch. This is a new skill for me and I can tell I need practice judging where to aim to get the line over the branch I want. But the equipment I have is just about right for the light wires that I typically use.
I setup the little Elecraft KX2 with the Tufteln end-fed random wire antenna, connected directly to the radio. I brought a small Bioenno LFP battery, which I connected. I also brought a N3ZN key along as well. It took longer to get the antenna setup than any of the other equipment.
I had a cellular signal, so I was able to spot myself on the POTA website with my iPhone. I also used my iPhone to log contacts with the HAMRS app. I find it easy to log on the iPhone, although I am sometimes a bit fumbly and fat-finger the text.
I have a CQ message stored in the radio, so I set it off to call while I finished getting ready to take calls. And take calls I did. Even running just five watts of power, I worked a pile-up on the 20m band for nearly 45 minutes. When the hole was fished out, I changed to the 17m band, found an open frequency, and started calling. The Reverse Beacon Network picked me up and the POTA scraper respotted my activation at the new frequency.
I worked another pile-up for another half hour or so.
One thing I noticed was that my passband was a little too narrow. I had it set that way during my last activation, probably trying to improve the signal-to-noise ratio or because another operator work working on a nearby frequency. Nonetheless, I could hear a couple of station outside the passband, so I opened it up a bit so I could copy the signals and worked those callers too.
After a couple of hours, I had 32 or 33 contacts in my log, plenty for the activation. The sun was starting to get low in the sky and I still wanted a walk before the day ended. I also needed to attend to the model run and see what needed to be done, if anything.
It did not take long to recover the station and we were off towards home.
When Older Son arrived, we got The Girl out for a good walk. We got home just after the Sun fell below the horizon.
As usual, I learned a few more things.
Using an arborist throw kit is a learned skill. I need more practice to get the weight and line over my target branch. It is just practice.
I really like the lighter throw weight and the 1.7mm or 1.8mm line that I got on my second buy. The first kit is too heavy for what I do. The lighter kit will be perfect for the light wires I use and is a lot less weight and bulk to carry, should I decide to pack the kit in.
I need to work with the Tufteln EFRW antenna more. I could not get a good match on the 30m band (10MHz) with the KX2 and the EFRW antenna connected directly to the radio. This should work. I have an adjustment to make, I think.
The little KX2 is a fine radio for this kind of application. It is not as good as the larger KX3, but it is a lot smaller rig.
I should have used headphones for the activation. There was enough traffic noise to be distracting and interfere with my ability to copy the calling stations. I do not like to be isolated from the surroundings, however. So I have to get my powered headphones setup to wear while running the radio. They are also active ear protection, so they have microphones to provide situational awareness with control over the balance between communications and environmental sound levels.
All in all, it was a good day. I am grateful. Life is good!
